*Note, before attempting to connect to connect please make sure the RED camera's serial protocol is set to RCP: RED serial protocol settings
Connect the Latitude to the Camera
-Plug in Latitude Power (12v) and CTRL cable (to RED camera CTRL port)
-Power on Camera
-Latitude LED start up sequence goes Orange, White, Green.
-If the LATITUDE detects the camera correctly, it will flash CYAN.
To Connect an RTMotion MK3.1 Controller
-Power on the RTMotion MK3.1 Controller. If the channels match, it will link automatically.
-If it doesn't connect, then the wireless channels don't match. Try: MENU-->WIRELESS-->FIND RECV
To Connect FoolControl
-Connect your iOS device to the Latitiude's Wi-Fi network (it will show in Wi-Fi Settings as LATITUDE-**** where **** is the last four digits of the device's serial number, laser marked on to the case).
- Default Wi-Fi password is: "latitude" (all lower case).
- You can now open the FoolControl App, it will find Latitude/Camera and show up as e.g. RAVEN (CTRL)
*Note You may have to connect to the Camera Wi-Fi with your iOS device as a way to initialise a connection between Caemra, Latitude and Foolcontrol. Failing that, manually connecting with the ip address 192.168.0.1 and skipping passed any connection errors can help too.